Fishing & Hunting Tips

Best cordless drill ice auger

Looking for the best cordless drill ice auger setup? Well folks, you just took the smartest decision. I feel that a cordless drill setup is still an underdog that is actually a far more effective and wallet-friendly option than the other power options like gas augers or Electric ice augers.

Best Pick: Best cordless drill ice auger

$219.97
in stock
2 new from $219.97
Amazon.com
$229.95
$249.99
in stock
8 new from $249.99
Amazon.com
Free shipping
Too low to display
$339.00
in stock
5 new
10 used from $187.63
Amazon.com
Free shipping
Last updated on November 15, 2019 1:25 am


Now, why is that? Of course, you will get insane performance and value from the
Best Electric Ice Augers in the market. But on the other hand, it’s going to cost you a lot of money. But with a cordless drill setup, you will get the same performance which will cost you slightly over $300. I’m gonna show you that cordless drill ice auger setup here today at some point of the article. Now, isn’t that a smart move? 

Why cordless/drill driven ice auger? 

  • It’s affordable 
  • Gives the same amount of power as an electric auger 
  • Efficient 
  • You can turn your hand auger into power auger by going for a cordless drill 
  • Quiet as a ninja on a mission 
  • Extremely lightweight

Many ice anglers know this awesome budget hack nowadays and they are super satisfied with it just like me. Yup I used every type of ice augers in all these years but never had been this satisfied. So without further ado, let’s dive deeper into the article and find your Best Cordless Drill ice auger setup. 

Before starting, let’s have a look at a glance to our today’s champion from every section. 

  1. K-Drill Ice Auger- Best cordless drill Ice Auger 
  2. DEWALT DCD996P2 Hammer Drill – Best cordless drill 
  3. Clam drill auger conversion kit- Best cordless drill auger adaptor 

How To Turn Your Drill Into An Ice Auger

Turning a drill into ice auger is still confusing for a beginner angler. If you already know all the ins and outs, you can jump down to the real-life reviews of our cordless drills and ice augers. But if you don’t know how it works, let’s make it super easy for you. 

Just follow the steps. 

#Get a good ice auger adaptor if you have a hand auger 

If you wanna turn your simple hand auger into a cordless drill auger, you will be needing an ice auger adaptor which will help to connect a drill with the auger. It’s just a simple piece of metal which will cost only a few bucks. There are two types mainly.

You can see the Clam drill auger conversion kit which is an auger adaptor basically. If you ask me, this is the best adaptor you can get! It strongly keeps the drill and the auger together which you will get from any good adaptor. But the main reason you wanna buy it is the wide handle it features. This handle almost turns the setup into an expensive ice auger. 
Also, the handle resists the auger from drowning in water which is an important fact to consider.

The second option you have is the Ice Auger Cordless Drill Adapter. It’s a great option too at a very cheap price. The circle part helps the auger to float in water. It is simply an aluminum adapter that fits a 3/8 or 1/2 inch drill chuck.

#Get a drill driven ice auger 

First and foremost, it’s only the ice auger with blades. This doesn’t include a power drill with it. You have to buy it separately. So just like all other ice augers, get your preferred diameter or size and this must need a drill to make the job done. Now one of the major factors you should consider here is the requirements it needed. 

Suppose, if you’re going to run the setup with a K-Drill for example, you’ll want to know that only a handful of cordless drills are supported by K-Drill itself (see the K-Drill Website for models). Find out if the drill fills all the requirements of the ice auger or not and then choose the drill. 

#Get the drill now and set it in speed-1 

Before buying the drill, match the chuck size of the drill and ice auger. If it matches to go for it and keep it on low torque. What I mean by that is always keep the drill in speed-1 and set it in drill mode. Here you go, simple isn’t it! 

Best cordless drill driven augers

1. Nils master UR600C Cordless drill auger

Nils master UR600C Cordless drill auger

 

Specs

  • Diameter: 4 ½”, 6”, and 8”
  • Length: 47” blade
  • Blade Type: shaver
  • Weight: N/A

Description: When we are talking about cordless drill ice augers, there are not many options we have. But from the very few options, Nils Master Cordless Drill Ice Auger is an amazing piece of work. What’s best about this drill driven auger is the versatility it offers. No worries if there is no more juice left on the drill battery, you can turn it into a hand-driven auger. Awesome right? 

Well as you know the cordless drill is not included with the auger, you will be needing a powerful, high-torque motor to drive these blades into the ice. Just a note here, Nils recommends that your drill can generate no less than 700 inches/pounds of torque.

The blade Nils Master has to offer is shaver style blades. Now one thing is great about this blade is it’s so sharp that it cuts ice so fast and furiously. You don’t even have to apply much pressure because of the razor-sharpness. 

The only downside you will have with this blade is it will be dull at some point and you have to know the skill of how to sharpen an ice auger blade in order to get it back into action. The blade comes with 4 ½”, 6”, and 8” diameter. So yeah, you can use it for pan fishing or pike fishing whatever you want.

Pros
  • Comes with many size options
  • Durable
  • Razor-sharp blades which cut the ice so fast
  • The disk which helps the auger to float on water
  • You can turn it into hand auger anytime, great versatility
Cons
  • Blade gets dull fast if compared with chipper blades

2. K-Drill Ice Auger

K-Drill IDRL08, 8" Auger Only

 

Specs

  • Diameter: 6” and 8”
  • Length: 36” blade
  • Blade Type: chipper
  • Weight: 5 lbs.

Description: K-Drill’s ice auger has won plenty of converts from gas-powered alternatives because it’s effective, light, and easy to use.

Attached to a powerful drill via a ½-inch chuck, this auger’s power and speed are directly related to the hand tool you connect it to. K-Drill specifies that the minimum torque needed to drive its chipper blades is 725 inches/pounds, and you’ll need at least an 18-volt battery running that drill. A side stabilizer arm is essential, too, to help you bear down and control the auger. That’s a lot of drills, and anything less won’t run this auger effectively.

With a sufficiently powerful drill behind it, this auger is a hole-making machine, and it’s not unusual to see one fully-charged battery lasting for a few dozen holes. While not as fast as gasoline- or propane-powered augers, the K-Drill is much lighter and easier to use. With a drill, this system should weigh-in at about ten pounds, which is about ¼ of the weight of big gasoline or propane auger with fuel.

In and of itself, the ultra-portable nature of this auger is a characteristic we really like. If you’ve got a long trip to the ice or need to make holes over a relatively large area, you’ll appreciate not lugging extra weight around with you.

Pros
  • Great durable drill auger
  • Piece of foam in the top to the auger floating
  • Chipper blades are much long-lasting
  • So lightweight
Cons
  • The chipper blade takes more time to drill through the ice
  • consumes more power from the battery

Best cordless drill

3. DEWALT DCD996P2 Hammer Drill

DEWALT 20V MAX XR Hammer Drill Kit, Brushless, 3-Speed (DCD996P2)

 

Specs

  • 1/2 cordless drill
  • Extended battery life – XRP batteries
  • LED work light
  • 18 Volts- 5-amp hour battery

Description: Coming to the cordless drill, here’s a champion of our todays best cordless drill for ice augers: the DEWALT DCD996P2 Lithium Ion Brushless 3-Speed Hammer Drill. It’s a ½ inch cordless drill that would fit nicely with a Nils master UR600C Cordless drill auger or a K Drill Ice Auger which will be the best choice somehow! You can also go for an  ice auger adaptor if you wanna use it with your hand auger. 

Now apart from the amazing facts that it’s a real beast in a featherweight and gives huge amount of non-stop power, I wanna mention the best quality for an ice auger. It’s the battery and battery life. Yup folks, the lightweight and reliable  5-amp hour 20V lithium ion battery makes it really worthy. When you’re choosing a battery for an ice auger, try to get the best amp-hour you can. And 5-amp hour is going to be a long-lasting one, trust me! 

Another biggest advantage you will get with this motor is the stealthy performance for the brushless motor. Setting it to the speed-1, it will be a ninja in the ice! 

There’s more reason why we are highly recommending it. The USA made drill also features a sturdy metal handle which will come real handy with a cordless drill ice auger. You can set it 360° depends on your comfort angle. Also, the 3-mode light is a great advantage for early or late ice. Last but not least, the sturdy box that it offers keeps the drill fully protected. 

Folks, considering the insane power, lightweightness (about 10 lbs. only), soundless performance, durability and price, it’s the best cordless drill you can find on the market today. So, sure it a try, it won’t let you down!

Pros
  • Well built
  • 5-amp hour battery, gives great backup
  • Brushless motor
  • So lightweight
  • Fit’s with most of the drill ice augers
  • Led light
  • Offers metal handle
  • Sturdy case
Cons
  • Battery needs to be warm for better performance

4. Hitachi Lithium-Ion cordless drill

Hitachi DS18DGL 18-Volt Cordless Lithium-Ion 1/2 Inch Compact Drill Driver Kit (Lifetime Tool Warranty) (Discontinued by the Manufacturer)

 

Specs

  • 1/2 cordless drill
  • Good Battery Life
  • LED worklight
  • 400 in/lbs of torque
  • 18 Volts

Description: Here comes an all over great lithium Ion cordless drill, the Hitachi DS18DGL 18-Volt Cordless Lithium-Ion drill. As you know, all the drill has turned into li-ion option nowadays and Hitachi managed it pretty well with sturdy built-in quality and performance. And if it comes to the Brand, of course, you can put a lot of trust in Hitachi. 

Again it’s a ½ inch auger which will fit with most of the cordless drill ice augers in the market. Just be cautious about the features, see if it matches the requirements of each other or not. You will need a good ice auger adaptor if you wanna set it with any hand augers. 

Wanna know what’s best about this drill machine? Why do you wanna buy it? Here’s the strongest reason. This cordless drill comes with 2 different 18V li-ion battery while most of the brands are offering a single battery in the same price range. How amazing is that? More batteries mean more juice, more holes, and eventually more fish! 

Besides satisfying battery life, the charger it offers is pretty cool. It takes less than an hour to fully charged. Amazing, right? 

It felt slightly overweight compared with other cordless drill setups but still very lightweight and easy to use. With the led light and sturdy carry-bag, the drill provides a great deal for an angler. You can have em if you wanna enjoy a smooth and long time drilling experience. 

Pros
  • So durable
  • 5-amp hour battery, gives great backup
  • 2 battery
  • Brushless motor
  • Led light
  • Sturdy case
Cons
  • No handle, you have to get one

Best cordless drill ice auger adaptor

Clam drill auger conversion kit

Clam 9935 4567-0792 Drill Auger Conversion Kit

 

6. Lakco Nimrod Ice Auger Adapter

Lakco Nimrod Ice Auger Adapter - Converts Hand Auger to Power Auger - Made in USA - #TONII - for Pin System Augers

 

7. Ice Auger Cordless Drill Adapter

Ice Auger Cordless Drill Adapter for Ice Fishing - Fits 3/8 and 1/2 Drills

Nicholi Wyto

Hey I'm Nicholi Wyto is a professional sports fisherman and hunter, love to enjoy spending time in Michigan’s rugged northern forests. I love to explore my experience and help others who are interested in fishing and hunting.

Add comment

This site uses Akismet to reduce spam. Learn how your comment data is processed.

Recent Posts